25 Nov 2024
THERMO-TAG® THERMAL DETECTION & TRIGGERING DEVICE FOR THE FIRE EXTINGUISHERS
Thermo-Tag® is suitable for use with both aerosol and impulse powder reactor type fire extinguishers. Thermo-Tag® does not require an external electrical source.
How Does It Work?
Thermo-Tag®, sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected. It can produce NO-NC output with the relay on it.
It is suitable for use in dirty, oily environments with its special box with IP67 sealing. PCB is UL, RoHS and CE certified. Triggering is
done with a 3VDC Li-ion battery on the card. The shelf life of the battery is 5 years.
Where Can It Be Used?
- Flammable and explosive hazardous areas
- Electric panels
- Machinery and Electrical rooms
- Petrochemical Industries
- Warehouses
- Indoor spaces
- Tunnels
- Underground cable galleries
Technicial Specifications
- Thermo-Tag® is suitable for use in dirty and oily environments with its special box.
- The protection level against environmental conditions is IP67.
- It sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected.
- Thermo-Tag® can produce NO-NC output with the relay on it.
- PCB is UL, RoHS and CE certified.
Categories
- Extinguishers
- Fire Detection
- Fire Prevention